THE ZAMBEZI 10FT KAYAK
THE PERFECT ALL-ROUNDER. KAYAK
Like its bigger brother, the Zambezi 10ft kayak, designed to be perfect for both the fisherman and reactional paddler, at 10ft in length, it’s incredibly agile, quick, and packs a punch taking on both flat water and open seas with ease.
Manufactured from very tough single rotomolded 5mm Polyethylene, the Zambezi is more than ready to take on nature’s elements.
The Zambezi is fitted with a rudder system that can be operated by either the foot pedal system or the handheld control positioned on the side.
Under the seat, you will find an access hatch that is easily removable by undoing the four stainless steel screws to maintain the handheld steering mechanism.
At the stern of the Zambezi, there is a large tank well for storing gear, and this has a cross-braced bungee cord to ensure that your equipment stays safely in place. There is an additional toolbox in front of the raised aluminum seating that can mount your fish finder and easily store your battery pack in the hatch. A scupper port with a 4mm protective cover at the exit point underneath the kayak protects your transducer when mounted on the brass inserts. Once the transducer is mounted, you can run a short line up to the toolbox above, and this will keep the deck neat and free of long cables allowing you more space to fish and paddle.
Should you wish to free up your hands while paddling, there is the option to remove the toolbox and replace it with a Fin or Prop drive. With the Fin or Prop drive installed, your hands can get busy casting out a lure or simply snapping a great picture on your phone or camera.
At the bow of the Zambezi, there is an additional hatch that is perfect for stowing your anchor or safety equipment. This hatch has cross-braced bungee reinforcement to secure and safeguard your equipment.
If fishing is your game, the Zambezi will be perfect with its four integrated sloping rod holders. There are two mounted behind the aluminum seating, and these are angled perfectly for trolling lures behind you as you paddle. In addition, there are two additional integrated rod holders in front of the seat that is great for changing lures, adding bait, or simply placing rods with lines down for bottom fishing.
Throughout the deck, there are ten scupper plug points, and these assist with the drainage of any excess water that may try to accumulate from rain or sea spray. Pull out the plugs, and the water will drain, allowing you to have a dry working area.
Mounted in front of the seating on both sides of the kayak are accessory rails. These are great for mounting extra rod holders or additional navigational equipment.
On the Zambezi, there are carry handles that assist with the loading and moving of the kayak. In addition, there is a carry handle on either side of the kayak, helping the paddler with entry and exit and controlling the kayak when launching. On the bow and stern of the Zambezi, there are additional carry handles, and these are perfect for loading and unloading the kayak.
Overall, the Zambezi 10ft kayak is durable and has agility and comfort to make any day on the water memorable.
Overview
This Kayak is not only great for fishing, but it is also one of the most adaptable and versatile kayaks on the market. It is stable as a single Kayak, speedy with a FinDrive, and it can move in reverse with the Prop drive or be used for an easy day on the water with the eBox and electric motor.
- Seating: Single
- Style: Sit on Top
- Roto-molded: 5mm Polyethylene Design
- Hardware: Marine Graded stainless steel fittings.
- Inserts: Brass
- Fin Drive Compatible
- Prop Drive Compatible
- Electric Motor Compatible
ADDITIONAL FEATURES:
- Rudder controlled for better tracking on open water
- Handheld and foot pedal steering options
- Stern tank well with a cross-braced bungee cord to safeguard your gear.
- Integrated Sloping trolling rod holders x 2
- Integrated sloping rod holders x 2
- Raised aluminum seating mounted on an adjustable sliding rail
- Accessory rails for additional mountings
- Toolbox for storage
- Scupper plugs for excess water drainage.
- Bow Storage hatch with bungee cording for extra security
- Carry handles on the sides for carrying
- Bow and stern carry handles for loading and transport
- Scupper port with perforated 4mm nylon cover for transducer mounting
KAYAK SPECIFICATIONS:
- Length: 305 cm / 10 ft
- Width: 80 cm / 32 inches
- Height: 37 cm / 15 inches
- Weight: 32 kg / 70 lbs
- Maximum Weight Capacity: 185 kg / 407 lbs
Q & A
Ask a Question-
I see there is a rudder system, can I connect the pedals and the hand rudder at the same time?
Unfortunately, not. The rudder system is designed to work individually as if both were connected and both paddlers try to operate the steering at the same time it could badly damage the rudder system set up inside of the kayak.
-
I don’t have solid roof racks, what can I do?
The Zambezi is a lightweight kayak in comparison to a lot of other models so you can make use of temporary racks such as the Self Inflating racks or the Rubber racks. These are both perfect solutions but keep in mind that traveling faster than 100kms per hour or in high winds can affect the temporary racks' ability to secure the kayak so keep to the speed limit and they will work perfectly.
-
Can I easily transport the kayak?
The Zambezi is not a difficult kayak to move as it only weighs 28kgs and measures 10ft in length, however, the Zambezi has high walls and is quite wide which could add a little difficulty to the initial lift. There are however Dollys that can make your loading and offload much simpler. By installing the Kayak Load Roller on your rear window you can easily roll your Zambezi up onto your roof racks. The load roller is attached with two very strong suction cups to the rear window and once attached lift the nose of the kayak onto the roller and pick up the tail and slide the kayak onto your racks.
-
Should I take out or leave the scupper plugs in?
Due to its shape and the fact that it has high walls the scupper plug tubes are long and do not allow any water to return so taking them out would not be a problem at all. By removing the scuppers completely, you would guarantee quick drainage from the deck which would be a lot better than possible water damming.
-
Can I beach launch with the Zambezi?
That would depend entirely on the condition at the launch. If the swell is small and the water conditions calm then a beach launch is entirely possible but large swell and choppy conditions would greatly affect the Zambezi and make the launch uncomfortable.
-
Am I limited to where I can go on the Zambezi?
No not at all, The Zambezi works well in all waterways from Rivers to open seas.
-
Can I mount a motor on the back of the kayak?
The design of the Zambezi doesn’t allow for a rear-mounted motor but you can use set up a Side motor mount which allows for the motor to be attached behind you by using the pre-molded bar mounting or easier still you can remove the Toolbox and install an E-box which fits in perfectly and this attachment and allows for an electric motor to be mounted directly in front of you for easy control.
-
Should I want to at some point upgrade my Zambezi what drive option could I use?
Our drive box designs on the Fin Drive and the Prop Drive allow for both to fit perfectly into the Zambezi by simply unscrewing the toolbox clips and removing the toolbox. Then insert the drive you want to use and away you pedal. Please ensure that you fasten the drive box clips securely as if the clips and the box are not secure then this will greatly affect the performance of the drives.
-
Can I adjust the seating forward and back?
Yes, the seating is adjustable forward and back by unscrewing the seat slider clips and moving the seat into the required position, and then fastening the Slider clips to secure the seat into position.
-
I see there is a Fishfinder compartment, how would you install that?
Under the kayak, there is a nylon slated protection plate that can be easily unscrewed. When you lift off the lid you will see four brass inserts and these are used to mount your transducer to the kayak. Once you have mounted the transducer you can run your cables up through the fish finder scupper port and onto the deck. Close the protection plate as this will ensure the longevity of the transducer beam. You can then decide when you want to mount your LCD screen and place your small lithium battery pack. A great place for the LCD is a rail mounting on the accessory rail as it is out of the way should you want to remove the Toolbox and replace it with one of the drive systems.
-
Would I be able to stand and fish on the Zambezi?
The hull shape and design of the Zambezi allow for incredible balance so yes you can stand and fish. The wide shape of the kayak and deep channels under the kayak allows the water to flow easily through the kayak’s hull and this aids in creating added balance and stability.
-
How fast is the kayak?
The average paddling speed is around 4.2 km an hour. The design and shape of the kayak allow for the kayak to glide easily through the water which makes the Zambezi nice and nippy but due to its design being based around stability, the wider shape tends to slow the kayak slightly.
Care
- Always store kayak in a shaded area and out of direct sunlight.
- Do not hang your kayak through the handles.
- Store your kayak on the side with the weight evenly displaced.
- Do not tie or try to secure your kayak through the handles.
- To avoid warping, ensure your kayak’s weight displacement is even during storage.
- Do not over tighten your kayak, especially in hot conditions as this can distort your kayak’s shape.
THE ZAMBEZI 10FT KAYAK
THE PERFECT ALL-ROUNDER. KAYAK
Like its bigger brother, the Zambezi 10ft kayak, designed to be perfect for both the fisherman and reactional paddler, at 10ft in length, it’s incredibly agile, quick, and packs a punch taking on both flat water and open seas with ease.
Manufactured from very tough single rotomolded 5mm Polyethylene, the Zambezi is more than ready to take on nature’s elements.
The Zambezi is fitted with a rudder system that can be operated by either the foot pedal system or the handheld control positioned on the side.
Under the seat, you will find an access hatch that is easily removable by undoing the four stainless steel screws to maintain the handheld steering mechanism.
At the stern of the Zambezi, there is a large tank well for storing gear, and this has a cross-braced bungee cord to ensure that your equipment stays safely in place. There is an additional toolbox in front of the raised aluminum seating that can mount your fish finder and easily store your battery pack in the hatch. A scupper port with a 4mm protective cover at the exit point underneath the kayak protects your transducer when mounted on the brass inserts. Once the transducer is mounted, you can run a short line up to the toolbox above, and this will keep the deck neat and free of long cables allowing you more space to fish and paddle.
Should you wish to free up your hands while paddling, there is the option to remove the toolbox and replace it with a Fin or Prop drive. With the Fin or Prop drive installed, your hands can get busy casting out a lure or simply snapping a great picture on your phone or camera.
At the bow of the Zambezi, there is an additional hatch that is perfect for stowing your anchor or safety equipment. This hatch has cross-braced bungee reinforcement to secure and safeguard your equipment.
If fishing is your game, the Zambezi will be perfect with its four integrated sloping rod holders. There are two mounted behind the aluminum seating, and these are angled perfectly for trolling lures behind you as you paddle. In addition, there are two additional integrated rod holders in front of the seat that is great for changing lures, adding bait, or simply placing rods with lines down for bottom fishing.
Throughout the deck, there are ten scupper plug points, and these assist with the drainage of any excess water that may try to accumulate from rain or sea spray. Pull out the plugs, and the water will drain, allowing you to have a dry working area.
Mounted in front of the seating on both sides of the kayak are accessory rails. These are great for mounting extra rod holders or additional navigational equipment.
On the Zambezi, there are carry handles that assist with the loading and moving of the kayak. In addition, there is a carry handle on either side of the kayak, helping the paddler with entry and exit and controlling the kayak when launching. On the bow and stern of the Zambezi, there are additional carry handles, and these are perfect for loading and unloading the kayak.
Overall, the Zambezi 10ft kayak is durable and has agility and comfort to make any day on the water memorable.
Overview
This Kayak is not only great for fishing, but it is also one of the most adaptable and versatile kayaks on the market. It is stable as a single Kayak, speedy with a FinDrive, and it can move in reverse with the Prop drive or be used for an easy day on the water with the eBox and electric motor.
- Seating: Single
- Style: Sit on Top
- Roto-molded: 5mm Polyethylene Design
- Hardware: Marine Graded stainless steel fittings.
- Inserts: Brass
- Fin Drive Compatible
- Prop Drive Compatible
- Electric Motor Compatible
ADDITIONAL FEATURES:
- Rudder controlled for better tracking on open water
- Handheld and foot pedal steering options
- Stern tank well with a cross-braced bungee cord to safeguard your gear.
- Integrated Sloping trolling rod holders x 2
- Integrated sloping rod holders x 2
- Raised aluminum seating mounted on an adjustable sliding rail
- Accessory rails for additional mountings
- Toolbox for storage
- Scupper plugs for excess water drainage.
- Bow Storage hatch with bungee cording for extra security
- Carry handles on the sides for carrying
- Bow and stern carry handles for loading and transport
- Scupper port with perforated 4mm nylon cover for transducer mounting
KAYAK SPECIFICATIONS:
- Length: 305 cm / 10 ft
- Width: 80 cm / 32 inches
- Height: 37 cm / 15 inches
- Weight: 32 kg / 70 lbs
- Maximum Weight Capacity: 185 kg / 407 lbs
Q & A
Ask a Question-
I see there is a rudder system, can I connect the pedals and the hand rudder at the same time?
Unfortunately, not. The rudder system is designed to work individually as if both were connected and both paddlers try to operate the steering at the same time it could badly damage the rudder system set up inside of the kayak.
-
I don’t have solid roof racks, what can I do?
The Zambezi is a lightweight kayak in comparison to a lot of other models so you can make use of temporary racks such as the Self Inflating racks or the Rubber racks. These are both perfect solutions but keep in mind that traveling faster than 100kms per hour or in high winds can affect the temporary racks' ability to secure the kayak so keep to the speed limit and they will work perfectly.
-
Can I easily transport the kayak?
The Zambezi is not a difficult kayak to move as it only weighs 28kgs and measures 10ft in length, however, the Zambezi has high walls and is quite wide which could add a little difficulty to the initial lift. There are however Dollys that can make your loading and offload much simpler. By installing the Kayak Load Roller on your rear window you can easily roll your Zambezi up onto your roof racks. The load roller is attached with two very strong suction cups to the rear window and once attached lift the nose of the kayak onto the roller and pick up the tail and slide the kayak onto your racks.
-
Should I take out or leave the scupper plugs in?
Due to its shape and the fact that it has high walls the scupper plug tubes are long and do not allow any water to return so taking them out would not be a problem at all. By removing the scuppers completely, you would guarantee quick drainage from the deck which would be a lot better than possible water damming.
-
Can I beach launch with the Zambezi?
That would depend entirely on the condition at the launch. If the swell is small and the water conditions calm then a beach launch is entirely possible but large swell and choppy conditions would greatly affect the Zambezi and make the launch uncomfortable.
-
Am I limited to where I can go on the Zambezi?
No not at all, The Zambezi works well in all waterways from Rivers to open seas.
-
Can I mount a motor on the back of the kayak?
The design of the Zambezi doesn’t allow for a rear-mounted motor but you can use set up a Side motor mount which allows for the motor to be attached behind you by using the pre-molded bar mounting or easier still you can remove the Toolbox and install an E-box which fits in perfectly and this attachment and allows for an electric motor to be mounted directly in front of you for easy control.
-
Should I want to at some point upgrade my Zambezi what drive option could I use?
Our drive box designs on the Fin Drive and the Prop Drive allow for both to fit perfectly into the Zambezi by simply unscrewing the toolbox clips and removing the toolbox. Then insert the drive you want to use and away you pedal. Please ensure that you fasten the drive box clips securely as if the clips and the box are not secure then this will greatly affect the performance of the drives.
-
Can I adjust the seating forward and back?
Yes, the seating is adjustable forward and back by unscrewing the seat slider clips and moving the seat into the required position, and then fastening the Slider clips to secure the seat into position.
-
I see there is a Fishfinder compartment, how would you install that?
Under the kayak, there is a nylon slated protection plate that can be easily unscrewed. When you lift off the lid you will see four brass inserts and these are used to mount your transducer to the kayak. Once you have mounted the transducer you can run your cables up through the fish finder scupper port and onto the deck. Close the protection plate as this will ensure the longevity of the transducer beam. You can then decide when you want to mount your LCD screen and place your small lithium battery pack. A great place for the LCD is a rail mounting on the accessory rail as it is out of the way should you want to remove the Toolbox and replace it with one of the drive systems.
-
Would I be able to stand and fish on the Zambezi?
The hull shape and design of the Zambezi allow for incredible balance so yes you can stand and fish. The wide shape of the kayak and deep channels under the kayak allows the water to flow easily through the kayak’s hull and this aids in creating added balance and stability.
-
How fast is the kayak?
The average paddling speed is around 4.2 km an hour. The design and shape of the kayak allow for the kayak to glide easily through the water which makes the Zambezi nice and nippy but due to its design being based around stability, the wider shape tends to slow the kayak slightly.
Care
- Always store kayak in a shaded area and out of direct sunlight.
- Do not hang your kayak through the handles.
- Store your kayak on the side with the weight evenly displaced.
- Do not tie or try to secure your kayak through the handles.
- To avoid warping, ensure your kayak’s weight displacement is even during storage.
- Do not over tighten your kayak, especially in hot conditions as this can distort your kayak’s shape.
