When you first look at the Elite Pro and notice all its features and unique characteristics, something in your mind flips a switch and starts planning that ultimate adventure.

Manufactured from very tough single rotomolded 5mm Polyethylene, the Elite Pro is more than ready to take on nature’s elements.

At 13ft in length and with a width of 90cm / 35.4 inches, the Elite Pro is sleek and agile while still maintaining maximum stability and safety.

Looking at the kayak’s features, one immediately notices that space and storage are abundant on the Elite Pro. At the stern, there is a large tank well that can support a lot of equipment, and this is secured with cross brace bungees for safeguarding your equipment. There is a round lockable hatch on the top of the tank well, which is excellent for accessing the storage area inside the kayak. A convenient and well-located under-seat storage tray on an adjustable, slidable rail under the aluminum mesh seat is a great place to store tackle or simply an easy-to-reach snack for the day. Directly in front of the raised seating is a handy toolbox perfect for mounting a fish finder and stowing the battery pack inside. Positioned close by is a scupper port with a 4mm perforated nylon cover under the kayak, so mounting a transducer and running the lines to the nearby toolbox with your fishfinder and battery pack is a neat and straightforward operation. This toolbox can also be removed and replaced by either a fin or propeller drive should you wish to upgrade your kayak and ultimately free up your hands for that quick cast or snap a memorable moment. There is another center console hatch beyond the toolbox with stainless steel clips to secure and lock your gear safely inside. Finally, there is an open storage area secured by a tarpaulin covering at the kayak’s bow to create further packing ability.

If fishing is your game, then the Elite Pro is equipped with all the features you would need to enhance your day on the water. Four integrated sloping rod holders are positioned and angled perfectly behind the aluminum seating. Inserted at the perfect angle for trolling rods and wide enough set, so your lures run free behind the kayak without getting caught up and tangled.

Additional integrated rod holders in In front of the seat are angled away from the paddler. These are incredibly handy for applying bait, changing a trace, or simply watching the rod’s action from a comfortable position.

The Elite Pro has a built-in rudder system, and this is operated either by the foot pedals on the adjustable rails or by the handheld system positioned on the side of the kayak. The foot and handheld system work independently and are easily adjustable by switching the rudder guidelines on the rudder itself. There is also an access hatch under the seat that allows easy access to the rudder handle if you need to maintain your kayak.

Two accessory rails on the kayak sides are perfect for mounting your Go-pro, Fishfinder, or navigational equipment.

When out on the water, weather can change rapidly, and rain can hinder any open area on a kayak. Keeping this in mind, we positioned ten scupper drainage points throughout the deck to allow water gathered from rain and sea spray to drain off directly and allow for a more comfortable dry deck.

Transporting the kayak to and from the car can be tricky, so we have added four secure carry handles. There is a handle on either side of the kayak, and these are great for assisting with loading and supporting the kayak while in moving water. The handle also makes life easier when climbing in or out of the kayak. A handle on the bow and the stern assists with loading or moving the kayak from place to place.

Overall, The Elite Pro 13ft kayak is built for adventure whether you are an avid fisherman, a recreational paddle, or simply looking to get away a bit and explore the Elite Pro has all the features in its design to make that experience fun and memorable.

Overview

When you first look at the Elite Pro and notice all its features and unique characteristics, something in your mind flips a switch and starts planning that ultimate adventure.

Manufactured from very tough single rotomolded 5mm Polyethylene, the Elite Pro is more than ready to take on nature’s elements.

At 13ft in length and with a width of 90cm / 35.4 inches, the Elite Pro is sleek and agile while still maintaining maximum stability and safety

• Seating: Single Seater
• Style: Sit on Top
• Roto-molded: 5mm Polyethylene Design
• Hardware: Marine Graded stainless steel fittings.
• Inserts: Brass

Features

ADDITIONAL FEATURES:

• Stable
• Rudder operated
• Large rear tank well with 5mm cross-braced bungee to secure gear.
• Round storage hatch behind the seating allows for easy access to the hull interior
• Raised aluminum mesh seat for comfort
• Four integrated rod holders for trolling
• Two additional integrated rod holders In front of the seat position.
• Under-seat tackle tray for extra gear
• Removable toolbox
• Center console lockable hatch
• Fishfinder scupper port for a transducer with protective cover
• Accessory rails for mounting additional equipment and hardware
• Bow storage with a tarpaulin cover for added storage
• Foot and handheld rudder operation
• Carry handle on the sides of the kayak for easy mounting and control
• Bow and stern carry handle for easy transporting and loading.

Specs

KAYAK SPECIFICATIONS:

• Length: 396 cm / 13 ft.
• Width: 90 cm / 35.4 inches
• Weight: 35 kg / 77 lbs
• Maximum Weight Capacity: 300 kg / 660 lbs

Care

• Always store kayak in a shaded area and out of direct sunlight.
• Do not hang your kayak through the handles.
• Store your kayak on the side with the weight evenly displaced.
• Do not tie or try to secure your kayak through the handles.
• To avoid warping, ensure your kayak’s weight displacement is even during storage.
• Do not over tighten your kayak, especially in hot conditions as this can distort your kayak’s shape.
• Do not use ratchet straps to secure your kayak when travelling. Rather opt for cam buckle straps to secure your kayak when travelling.